• PRODUCT CODE : 7B005L
  • NORMS AND LABELS : :
    Marquage CE
  • TECHNICAL DATA SHEET : show (en)
  • SAFETY DATA SHEET according to Regulation 1272/2008/EC (CLP) : show sur inscription (en)

EMFIMASTIC SANITAIRE N TRANSLUCENT

EMFIMASTIC SANITAIRE N TRANSLUCENT is a solvent-free, low modulous multipurpose one component alcoxy silicone sealant based on polysiloxanes and a neutral moisture curing system.
EMFIMASTIC SANITAIRE N TRANSLUCENT has CE marking for fthe application sealant for sanitary joints according to European Standard EN 15651-3 (S).

APPLICATION AREAS

EMFIMASTIC SANITAIRE N TRANSLUCENT is specially designed for sanitary applications (wet rooms...)
EMFIMASTIC SANITAIRE N TRANSLUCENT has a good adhesion without primer on most of materials used in building industries : glass, aluminium, steel, stainless steel, anodised steel, ABS, tiles, treated wood and PVC.

MANUAL

Substrate preparation :
The substrates must be clean, dry, free of dust, oil, grease and any contaminants that could harm bonding.
They may be cleaned with alcohol, methylethylketone (MEK), acetone or EMFICLEAN AL cloth.
Use a primer if necessary.
Check the compatibility of the solvent used with the substrates.
If necessary, rub down metal surfaces beforehand. Clean them after rubbing down.
Allow the substrate to dry after degreasing.



It is recommended to clean concrete with a metal brush and to degrease PVC, glas or aluminium with EMFICLEAN AL cloth.
When using solvents, extinguish all sources of ignition and carefully follow the safety and handling instructions given by the manufacturer or supplier.

Caulking :
EMFIMASTIC SANITAIRE N TRANSLUCENT can be applied by a manual or pneumatic gun.
After application, use a wet putty knife to smooth the joint.
Do not apply at a temperature under 5 °C.
In cold weather, store the cartridges at about 20 °C before use.

Cleaning :
Tools can be cleaned with white spirit or with EMFICLEAN AL cloth before curing.
After curing, remove mechanically.