EMFIMASTIC + SILICONE VITRE

EMFIMASTIC + SILICONE VITRE is a one component acetoxy silicone sealant based on polysiloxanes and a moisture curing system which forms a flexible joint.
EMFIMASTIC + SILICONE VITRE is weather-proof and resistant to low and high temperatures.
EMFIMASTIC + SILICONE VITRE has CE marking for following application:
sealant for glazing usable in cold climate according to European Standard EN 15651-2 G CC.

APPLICATION AREAS

EMFIMASTIC + SILICONE VITRE adheres very well on aluminium and vitrified surfaces.
EMFIMASTIC + SILICONE VITRE is specially designed for sealing joints, double glazing, sealing work in cold chambers.
EMFIMASTIC + SILICONE VITRE is unsuitable for sanitary joints and joints in buildings for façade elements.

MANUAL

Substrate preparation :
The substrates must be clean, dry, free of dust, oil, grease and any contaminants that could harm bonding.
They can be cleaned with alcohol, methylethylketone (MEK), acetone or EMFICLEAN AL cloth.
Check the compatibility of the solvent used with the substrates. Allow the substrate to dry after degreasing.
When using solvents, extinguish all sources of ignition and carefully follow the safety and handling instructions given by the manufacturer.
Caulking :
EMFIMASTIC + SILICONE VITRE can be applied by a manual or pneumatic gun.
After application, use a wet putty knife to smooth the joint.
Do not apply at a temperature under 5 °C.
In cold weather, store the cartridges at about 20 °C before use.
Cleaning :
Tools can be cleaned with white spirit, MEK, acetone or EMFICLEAN AL cloth before complete curing. After curing, abrasion is necessary.