EMFIMASTIC S is a one component acetoxy silicone sealant based on polysiloxanes and a neutral moisture curing system which forms a flexible and resistant joint.
EMFIMASTIC S is water-tight, weather-proof and resistant to most usual chemicals and fluids. It can be easily extruded and is resistant to mould.


Sealing for windows, sanitary, ceramics, tanks, swimming-pools... inside and outside.
EMFIMASTIC S adheres very well on glass, aluminium, ceramics and on most metals and plastics.


Substrate preparation :
The substrates must be clean, dry, free of dust, oil, grease and any contaminants that could harm bonding.
They can be cleaned with alcohol, methylethylketone (MEK), acetone or EMFICLEAN AL cloth.
Check the compatibility of the solvent used with the substrates.
Allow the substrate to dry after degreasing.
When using solvents, extinguish all sources of ignition and carefully follow the safety and handling instructions given by the manufacturer.

Caulking :
EMFIMASTIC S can be applied by a manual or pneumatic gun.
After application, use a putty knife to smooth the joint.
Do not apply at a temperature under 5 °C.
In cold weather, store the cartridges at about 20 °C before use.

Cleaning :
Tools can be cleaned with MEK, acetone or with EMFICLEAN AL cloth before complete curing. After curing, abrasion is necessary.