EMFICOL PVC/PVC is based on chlorinated synthetic resins dissolved in organic solvents.
EMFICOL PVC/PVC is CE marked according to standard EN 14680 (adhesives for non-pressure thermoplastic piping systems) for PVC-U (unplasticized).


EMFICOL PVC/PVC is convenient for bonding rigid PVC (gutters, sewage pipes, panels, profiles, cable jackets).


Substrates preparation :
The substrates to be assembled must be dry, dust free and not have any traces of grease or other contaminants that could adversely affect the adhesive performance.
If the substrates need to be cleaned, EMFINET 683, methylethylketone (MEK) or acetone may be used.
After rubbing down, the surface should be recleaned
When using solvents, extinguish all sources of ignition and carefully follow the safety and handling instructions given by the manufacturer.

Application :
Temperature of adhesive and substrates has to be between + 18 °C and + 25 °C.
For pipes, check the proper fitting of both ends (male and female).
Coat an even layer of EMFICOL PVC/PVC with a brush on both parts to be assembled with no excess.
Insert immediately (EMFICOL PVC/PVC is fast drying) one part into the other pushing lengthwise without any twisting.
Pull off immediately excess of glue with a clean cloth. Avoid handling for 10 min after assembly.
Drain pipes can be put in service after 6 h.

Cleaning :
Tools can be cleaned with MEK or acetone.