EMFIPARQUET RL is a fast setting single component water-based vinyl adhesive.


EMFIPARQUET RL is specially designed for bonding hardwood flooring together at tongue and groove when laying a floating floor system.


Substrate preparation :
Wood panels must be even, clean, dry, free of dust and grease.
Do not work at temperatures below +10 °C or when the relative humidity exceeds 65 %.
If necessary, heat and ventilate the room.
The humidity of the parquet flooring should be between 7 and 11 %.

Application :
Apply EMFIPARQUET RL with the feeding bottle nozzle on the top groove edge in a discontinuous line on lath or panel length.
Fit the panels together tightly to assure maximum adhesive distribution and adequate bond during the 10 following minutes.
Leave a free space of 10 to 20 mm all around the room.
Wipe off any access adhesive that has been squeezed out between the joints.
Allow to dry for at least 48 hours before sanding.

Cleaning :
Excess adhesive, smudges and tools can be cleaned with water before drying.