EMFIBOIS 863

EMFIBOIS 863 is a polyvinyl acetate water-based adhesive.
EMFIBOIS 863 is cold water resistant according to standard EN 204-D3.

APPLICATION AREAS

EMFIBOIS 863 is a fast, highly water resistant wood adhesive providing a clear film.

MANUAL

Substrates preparation :
The substrates to be assembled must be dry, dust free and not have any traces of grease or other contaminants that could adversely affect the bonding performance.
If necessary, rub down surfaces beforehand.
Wood humidity should be between 8 and 12 % for optimal bonding.
The temperature of adhesive and materials must be between 10 and 30 °C, preferentially between 18 and 20 °C.


Application :
Apply an even layer with a notched spreader, a brush or a roller.
Tools must be in stainless steel or in plastic matter (brush handles may also be of wood).
A layer on one of both surfaces is usually sufficient.
For hard or exotic woods, a layer on both surfaces is recommended.
Assemble as soon as possible and clamp with a pressure between 7 and 10 daN/cm².
Pressure and pressing time depend on type of wood, moisture, temperature and coating weight.

Cleaning :
Wet excess adhesive, smudges and tools can be cleaned with water.