EMFIBOIS 860

EMFIBOIS 860 is a polyvinyl acetate water-based adhesive.

APPLICATION AREAS

EMFIBOIS 860 is used in the furniture industry for bonding of wood, laminated panels, veneer, profiles.

MANUAL

Substrates preparation :
The substrates to be assembled must be dry, dust free and not have any traces of grease or other contaminants that could adversely affect the bonding performance.
If necessary, rub down surfaces beforehand.
Wood humidity should be between 8 and 12 %, not over 15 %.

Application :
Homogenize if necessary before use.
Apply an even layer onto one of the surfaces to be bonded with a notched spreader, a brush or a roller.
Assemble immediately or during the 2 following minutes and clamp at a pressure between 2 and 5 daN/cm² according to the type of wood.
Pressing time depends on type of wood, hygrometry, temperature and coating weight.

Cleaning :
Excess adhesive, smudges and tools can be cleaned with water.